1.Welcome to our website,hope we can be the key business partner in the near future.
- Phone: +86-020-31606393
- E-mail: firstname.lastname@example.org
- Fax: +86-020-31606393
Tiles are fired at high temperatures, and there are many tiny voids that are invisible to the naked eye, and the water absorption of each tile is different. If it is not soaked, it will greatly reduce the service life if it is too dry. Soaking the tiles before the paving is to allow the pores to absorb the water sufficiently, absorb the sufficient moisture, and then apply the cement mortar, so as not to absorb the moisture of the tiles, so that the paving quality can reach a certain level. Standards, it is not easy to appear after the tile is empty, falling off, cracks and so on.